What’s the difference between Vacuum Oil Purifier and Centrifugal Oil Purifier
The oil purifier is mainly used for the purification of insulating oil, turbine oil, and lubricating oil in power plants and power stations.
What is an oil purifier, the Features of it are as follows:
- High-content dehydration and deep purification can be completed by the oil purifier, and at the same time, it can help to remove impurities, acids, water impurities, etc.
- At the same time, an oil purifier is a collection of oil filtration, coagulation dehydration, box filtration, pressure filtration, and vacuum drying.
- The oil purifier adopts fuzzy control technology, reliable operation, long life, with pressure overload protection, automatic anti-drying, automatic defoaming, and automatic oil level control;
- The oil purifier comes with a cooling water tank, and the cooling cycle can be customized;
- The oil purifier can be synchronized with the unit online to remove water and discharge separated water online.
What is a centrifugal oil purifier?
Centrifugal oil purifier is also called centrifugal oil separator. It has a rotor with double nozzles and only needs the pressure generated by the oil to provide power. After the equipment is turned on, the oil in the oil tank is pumped to the rotor. After the rotor is filled with oil, the oil is sprayed along the lower nozzle of the turntable to generate driving force to make the rotor rotate at a high speed. The speed can reach more than 4000-6000 rpm. M, the force generated is more than 2000 times that of gravity. The principle of centrifugal force drives impurities directly from the oil.
The difference between vacuum oil purifier and centrifugal oil purifier
The vacuum oil purifier uses a combination of expansion, condensation, molecular adsorption, vacuum drying, mechanical filtration, fuzzy control, and other technologies to remove water, impurities, soap, acid, pigments, etc., to make it seriously emulsified and transparent, reaching hydraulic oil, thermal insulation, and industrial Lubricant, etc. The main structure of the vacuum oil purifier is composed of filters, heaters, vacuum cylinders, atomizers, vacuum pumps, drain pumps, coolers, thermostats, precision filters, and electrical controls.
The hard and sharp wear of metal materials, plus the residual oil of those parts that are worn or deteriorated, can be removed even in the size of 1μm. The separated impurities are attached to the impurity collection cap in the rotor, and only need to be cleaned regularly. In addition, due to the ratio of water to oil, under the action of centrifugal force, water is separated from the oil and exists in the oil pan inside the rotor, which only needs to be cleaned. The filtered oil flows directly back to the tank by gravity.
In order to extend the working hours of industrial equipment, you need an oil system that minimizes oil loss and maintains a high level of cleanliness, thereby reducing maintenance costs.
Now you might have the best oil system in the world: a true centrifugal oil purifier.
Normal oil purifiers complete the cleaning action of the filter element. Their disadvantage is that it is easy to pass small particles or completely by large impurities, so if your machine is damaged, the centrifuge rotor, then apart from the impurities in the oil, it does not contain any other, Will not affect your oil and oil additives. After the engine is started, separation and cleaning will begin immediately, without stopping midway. Even when it treats more than 5 times the amount of waste it needs, the cleanliness of the oil can be maintained.
